Mechanical & Physical Properties

? Key Units Shown Alternate Units
1 Density g / cm3 = 0.528 tz / in3
2 Young's Modulus GPa = 0.145x106 psi
3 Yield Strength MPa = 0.145 kpsi
4 Tensile Strength MPa = 0.145 kpsi
5 Thermal Conductivity W/(m*K) = BTU/(h*ft*°F)
6 Thermal Coefficient of Expansion x10-6 /°C = 0.556x10-6 /°F
7 Electrical Resistivity x10-9 ohm*m ?
8 Electrical Conductivity x106 / (ohm*m) ?
9 Hardness KHN ?
10 Elongation % ?

?

Alloy 1 2 3 4 5 6 7 8 9 10
35Au-65Cu 11.0 ? 107 328 90 19.1 85 11.8 ? 27
37.5Au-62.5Cu 11.1 ? 72 379 83 18.8 93 10.8 ? 30
40Au-60Cu 11.4 ? 69 427 75 18.6 103 9.7 ? 33
50Ag-50Pd 11.2 ? ? 379 ? ? ? ? ? ?
50Au-50Cu 12.0 ? 613 658 33 19.2 237 4.2 ? 38
70Au-30Ni 14.2 ? ? ? ? ? ? ? ? 5
80Au-20Cu 15.5 ? 127 393 52.0 17.9 131 7.6 ? ?
95Ag-5Al 9.2 ? ? ? ? ? ? ? ? ?
Cocuman 8.0 ? ? ? ? ? ? ? ? ?
Coin Silver 10.3 ? 280 ? ? ? ? ? ? 32
Copper 8.9 125 69 221 398.0 19.4 17 60.0 ? 55
Copper ABA? 8.1 96 279 520 38.0 19.5 198 5.1 110 42
Croniro? 13.9 ? ? ? ? ? ? ? ? ?
Cronisi? 7.5 ? ? ? ? ? ? ? ? ?
Cusil? 10.0 83 272 372 371 19.6 20.4 49.0 101 19
Cusil-ABA? 9.8 83 271 346 180.0 18.5 44 23.0 110 20
Cusiltin-10 9.75 ? 358 462 30 ? 247 4.0 ? 38
Cusiltin-5 9.9 ? ? ? ? ? ? ? ? ?
Cusin-1 ABA? 9.7 83 260 402 170.0 18.7 46 22.0 110 22
Gapasil?-9 ? ? 118 285 55.6 ? 136 7.4 ? 41
Gemco? 8.8 ? 117 306 24.3 ? 311 3.2 ? 450
Georo 14.7 ? ? 210 ? ? ? ? ? 1
Gold-ABA? 18.3 87 209 334 25.0 16.1 308 3.3 130 29
Incuro-60 13.0 ? 305 517 47.0 ? 163 6.1 ? 37
Incusil?-10 9.8 81 345 420 85.0 19.6 90 11.1 118 19
Incusil?-15 9.8 76 386 448 55.0 18.5 141 7.1 125 19

Incusil??ABA?

9.7 76 338 455 70.0 18.2 106 9.4 100 21
Nicoro? 10.9 ? 185 427 70.0 17.8 110 9.1 ? 28
Nicoro?-80 15.6 ? 372 520 50.0 17.8 153 6.5 ? 22
Nicuman?-23 7.9 ? 322 590 8.9 ? 845 1.2 ? ?
Nicuman?-37 7.7 ? 305 595 10.4 ? 732 1.4 ? ?
Nicusil?-3 10.0 ? 207 330 223.0 ? 34 29.0 ? 32
Nicusil?-8 ? ? 339 366 237.0 ? 32 31.3 ? 20
Nioro? 15.7 ? 686 792 28.0 17.5 274 3.7 ? 14
Palco 10.4 ? 341 661 35.0 ? 219 4.6 ? 43
Palcusil?-10 10.0 ? 327 374 145.0 18.5 53 18.9 ? 18
Palcusil?-15 10.3 ? 379 448 98.0 ? 78 13.0 ? 23
Palcusil?-25 10.4 ? ? ? ? ? ? ? ? ?
Palcusil?-5 10.0 ? 333 380 208.0 17.2 37 27.0 ? 11
Palni? 10.4 ? 772 978 42.0 15.0 184 5.4 ? 23
Palnicro?-36-M 8.8 ? ? ? ? ? ? ? ? ?
Palnicurom?-10 10.5 132 411 770 12.5 18.8 606 165.0 212 31
Palnicusil? 10.3 ? ? ? ? ? ? ? ? ?
Palniro?-1 13.1 ? 723 840 20.0 16.0 376 2.7 327 24
Palniro?-4 11.6 ? 655 827 29.0 17.0 269 3.7 337 28
Palniro?-7 14.5 ? 758 847 21.0 14.0 369 2.7 327 20
Palnisi-47 9.9 ? ? ? 3.7 ? 2 0.5 ? ?
Paloro? 18.4 ? 110 198 105.0 ? 73 13.7 ? 23
Palsil?-10 10.6 ? 95 205 108.0 ? 70 14.0 ? 40
RI-46 11.1 ? 752 869 ? ? ? ? ? ?
RI-48 9.5 ? ? ? ? ? ? ? ? ?
RI-49 10.6 ? 752 869 ? ? ? ? ? ?
Silcoro-60 13.7 ? ? ? ? ? ? ? ? ?
Silcoro-75 15.4 ? ? ? ? ? ? ? ? ?
Silfuz (1/4 Hard) 10.5 71 ? 227 428.0 19.7 17 60.6 ? ?
Silfuz (annealed) 10.5 71 ? 190 428.0 19.7 16 62.1 ? ?
Silver 10.5 71 54 125 418.7 20.6 1770 0.6 25 ?
Silver-ABA? 10.0 77 136 282 344.0 20.7 22 45.0 87 37
Sterling Silver ? ? 124 207 ? ? ? ? ? 41
Ticuni? ? ? ? ? ? ? ? ? ? ?
Ticuni?-60 ? ? ? ? ? ? ? ? ? ?
Ticusil?*** 9.4 85 292 339 219.0 18.5 34 29.0 ? 28

*** These properties are listed for the composite material Ticusil? and are not valid after brazing.

Selection of Materials

The determination of adaptability of any Wesgo? materials to the specific needs of the Buyer is solely the Buyer's prerogative and responsibility. All technical information, data, and recommendations are based on tests and accumulated experience, which Wesgo? believes to be reliable. However, the accuracy and completeness thereof are not guaranteed.

See our full trademarks list and contact details for our Intellectual Property team here.